Battery circuit breaker with padlock 12 volts 250 amps
250ampcircuit breakerwith padlock
Secure your shutdowns with this circuit breaker with padlock.
The primary purpose of a circuit breaker is to ensure complete electrical isolation of a vehicle.
There are 3 reasons for this:
- In the event of an accident or incident, it is necessary to isolate a car’s electrical circuit to avoid a possible short-circuit.
- On vehicles with a wiring harness in poor condition, to avoid short circuits and fire outbreaks.
- For long-term parking, to avoid discharging the battery if it is lost.
Technical specifications:
- Maximum current: 250 amps
- Voltage range: 0 to 27 Volts
- 2 M10 power poles
- Quarter turn
- IP55 sealing
- NO contact: Normally open
Widely used in motor racing, public works and agriculture.
| Weight | 0,3 kg |
|---|
You may also like…
-
Switches and switch pads6-pole battery switch 12 volts 100 amps FIA + resistor
6-pole FIA circuit breaker:
- Voltage range: 0 to 27V
- Mechanical contact
- 2 power poles
- 4-pole contact
- Meets FIA standards
-
Maximum voltage: 100 amps
-
Switches and switch padsResistor in porcelain for 12V circuit breaker 10 watts 3.3 ohm
Circuit breaker resistor:
- 3.3 ohm resistor
- 10 watts
- 6 to 24 volts
- Porcelain body
-
Hexagon LEDHexagon LED light Honeycomb ceiling lamp 2.4m x 4.8m 550W 6500k 230V detailing garage barber
Hexagon ceiling LED Light:
-
High quality manufacturing
- Honeycomb style
- Easy assembly, plug and play
- Powerful lighting 550W
- Lenght: 4.8M
- Width: 2.4M
- Tension: 230V
- 66 000 Lumens
- Delivered with 2 spare led bars
- Color: 6500K cold white
- 10 year warranty
- Meets more than 10 European and international standards
- ISO 9001
- 48H delivery in all Europe with DPD
-
Sell as a complete set, ready to assemble and use
10 reviews -
Electric sleeveRubber battery terminal covers, red and black 3 Sizes
Battery terminal covers:
- 3 sizes to choose from
- Protection against short circuits
- Used in automotive and industrial applications.
2 reviews3,50€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Tuesday 22 July
If you order in the next 16 h and 2 min.
Related products
-
Switches and switch padsPolarity reversing lever switch 6 terminals 12 volts
12-volt reversing switch:
- 3 positions ON – OFF – ON
- Self-holding in position
- Voltage range: 2 to 250 volts
- Maximum current: 15 amps
- Temperature range: -30°C to +90°C
- Installation hole diameter: 12mm
- Tightness: IP65
-
3 positions with dead centre
2 reviews -
Switches and switch padsSquare circuit breaker engine stop button for Japanese motocross bikes Yamaha, Kawasaki, Suzuki, Honda
Motorbike circuit-breaker button:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 30 amps
- Momentary button
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 30cm long harness with PVC sheath
- For Japanese motocross bikes
-
Yamaha, Kawasaki, Suzuki, Honda
-
Switches and switch pads8 round switch panel PDM look “Switch Panel” 25 amps 12 volts Discount Autosport 3D Printed
8-switch board, PDM look:
- 7 fixed, 1 momentary
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 20 amps / switch
- Dimensions: 140 x 80 mm
- Rigid 3D printed circuit board
- Temperature range: -40°C to +90°C
- Total weight: 150 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
-
Simple, reliable and cost-effective
-
Switches and switch padsPush button engine start LED starter switch 12V 50 amps
Engine Start button:
- Widely used for starter
- Contact type: Momentary
- Max current: 50 amps
- No need for relays
- IP55 sealing
- 2 screw terminals for connection
- NO contact: Normally open
-
LED backlight
1 review
