Injector repair kit with filter seals and injector tips for 14mm injectors from Bosch, Siemens, DEKA, Denso, Asnu, Deatcshwerk, Injector dynamics
The ultimate case for reconditioning your fuel injectors
Case with over 600 parts containing filters, seals and end caps
Recondition your injectors like a professional, replace your seals, filters and insulating end caps.
Put an end to leaks, blocked injectors and missing end caps.
Suitable for Bosch, Siemens, DEKA, Denso, Asnu, Deatschwerk, Injector dynamics, Asnu etc… injectors.
14mm injector seals:
- Red
- Green
- Blue
- Black
6mm injector filters:
- Black
- Red
- Blue
Injector tips:
- Yellow
- Green
- Orange
Supplied with a plug-pulling tool for removing the filters inside the injectors.
| Weight | 1 kg |
|---|
You may also like…
-
ConnectorsBosch JPT 2 to 7 way electrical connectors TE Connectivity
Bosch JPT connectors
- 2 to 7 way
- Safety clips
- Flange designed to accept a rubber sock
- Brand TE Connectivity
- Widely used on BOSCH appliances
-
Waterproof connectors
10 reviewsPrice range: €2,89 through €9,49Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Wednesday 11 March
If you order in the next 4 h and 34 min.
-
ConnectorsEV1 jetronic to EV6 and EV14 USCAR injector adaptor connector for large performance injectors
EV1 to EV6-EV14 injector plug adaptor:
- 7 amps per connection pin
- IP67 insulation rating (against dust and water)
- Safety clips
- Manufactured by Tyco Electronics
-
Sold individually
-
ConnectorsEV6 EV14 USCAR 2-way electrical connector for BOSCH fuel injectors
EV6, EV14 Uscar electrical injector connector:
- 7 amps per pin
- IP67 insulation range
- Safety clips
-
Supplied with crimp pins and gaskets
1 review -
Injector electrical connectorsEV1 jetronic injector adaptor connector pre-wired to EV6, EV14 USCAR for large performance injectors
Pre-wired adapter from EV1 to EV6-EV14 injector sockets:
- 7 amps per connection pin
- IP67 insulation rating (against dust and water)
- Safety clips
- Manufactured by Tyco Electronics
- Jetronic EV1 to EV6, EV14 USCAR
-
Sold individually
Related products
-
Injector seals and gasket120 Petrol Injector Microfilters Case – Injector Inlet Prefilters – 8 Sizes – Injection Reconditioning
Kit of petrol injector pre-filters (micro-filters)
- 🧰 Ideal for reconditioning your injectors
- 🔥 Restores a clean, even flow
- 🛠️ Simple replacement when cleaning injectors
- 🧱 High quality nylon mesh + copper ring
- 📦 Complete 120-piece case
- ⚙️ 8 different models for several types of injectors
- 🚗 Bosch / Toyota / Audi / Renault / Nissan / Keihin compatible
-
✅ Extends injector life for years
-
Injector seals and gasketBlack O-ring for petrol and E85 injector 12mm x 6mm x 3.5mm
Black 12mm injector seal:
- Inner diameter: 6mm
- Outside diameter: 12mm
- Thickness: 3.5mm
- E85 compatible
- Compatible with all petrol injectors having seals with an external diameter of 14mm
-
Sold individually
-
Injector seals and gasket
Black O-ring for petrol and E85 injector 14.5mm x 7.5mm x 3.5mm
Black 14mm injector seal:
- Inner diameter: 7.5mm
- Outside diameter: 14.5mm
- Thickness: 3.5mm
- E85 compatible
- Compatible with all petrol injectors having seals with an external diameter of 14mm
-
Sold individually
-
Injector seals and gasketRed O-ring for 12mm x 6mm x 3.5mm high-temperature and E85 petrol injector
Red 12mm injector seal:
- Inner diameter: 6mm
- Outside diameter: 12mm
- Thickness: 3.5mm
- Compatible with all petrol injectors having seals with an external diameter of 12mm
- High temperature resistant
- Resistant to E85 ethanol
-
Sold individually
