Hose and Fittings
Showing 37–48 of 80 resultsSorted by popularity
-
Dash 8 fittings and hose AN8Dash 8 connector 45° black for dash 8 hose
Dash 8 45° fitting
- Internal diameter: 12.7mm.
- 3/4″ – 16 UNF JIC thread.
- For an outstanding finish.
- Black anodised finish.
- Temperature range: -80°C to + 550°C
- Maximum pressure: 60 bar
-
Double lip seal
24,90€Add to basketDelivery expected on Tuesday 3 February
If you order in the next 18 h and 26 min.
-
Fuel pumps, filters and regulatorsUniversal reinforced fuel pump compatible with Ethanol E85, Petrol and Diesel Large flow rate 525 l/H
Ethanol fuel pump:
- Flow rate: 525 litres / Hours
- Maximum pressure: 10 bars
- Weight: 450 grams
- Maximum engine power: 500/550 hp
- Total length: 124mm
- Inlet diameter: 12mm
- Outlet diameter: 10mm
- Operating voltage: 6 to 18V
- Power consumption: 20 amps
- Compatible with Ethanol E85
- Compatible with petrol and diesel
-
Supplied with a fine sieve filter
84,90€Add to basketDelivery expected on Tuesday 3 February
If you order in the next 18 h and 26 min.
-
Dash 4 fittings and hose AN4Dash 4 90° black fitting for AN4 dash hose
Dash 4 90° fitting:
- Thread: AN4 = JiC7/16″ – 20 UNF
- Inside diameter: 5mm
- Material: CNC machined aluminium
- Black anodised
- Reusable
- Outstanding finish
- Temperature range: -80°C to + 550°C
- Maximum pressure: 60 bars
-
Double sealing lips
15,90€Add to basketDelivery expected on Tuesday 3 February
If you order in the next 18 h and 26 min.
-
Fuel pumps, filters and regulators0 to 7 bar 1/8 NPT thread petrol pressure gauge with fittings, plug and remote mounting T-piece
Fuel pressure gauge:
- 1/8 NPT thread
- Gauge diameter 45mm
- Compatible with all petrol, Ethanol E85 and diesel fuels
- Measures from 0 to 7 bar
- Offset mounting T
- 2 AN6 connections
- 2 Connections 1/8 NPT
- 1 1/8 NPT plug
- 1 small roll of teflon gasket for fittings
-
View and adjust your fuel pressure
24,90€Add to basketDelivery expected on Tuesday 3 February
If you order in the next 18 h and 26 min.
-
Fuel pumps, filters and regulatorsFacet type self-regulating low-pressure petrol pump for carburettor and buffer box
Facet type petrol pump:
- Fuel compatibility petrol, diesel/biodiesel, E85/ethanol
- Fixed pressure: 0.3 Bar
- Inlet connection 1/8 NPT
- Outlet connection 1/8 NPT
- Pump length 140mm
- Pump diameter 52mm
- Operating voltage: 8 to 18 Volts
- Operating current: 1.4 amps
-
Fixed flow rate: 100 L/H
124,90€Add to basketDelivery expected on Tuesday 3 February
If you order in the next 18 h and 26 min.
-
Fuel pumps, filters and regulatorsMotorbike fuel tap 8mm 2 positions
Motorbike fuel tap:
- Diameter 8mm
- M6 fixing lug
-
Resistant to all types of fuel
3 reviews -
Fuel pumps, filters and regulatorsDash 6 universal high flow petrol pressure regulator compatible with Ethanol E85, Diesel
Adjustable fuel pressure regulator:
- Adjustable pressure range: 1 to 10 bar
- Supports engine outputs of up to 600 hp
- Operating temperature range: -30°C to + 110°C
- Inlet and outlet threads: Dash 6 (AN6)
- Total weight: 300g
- CNC machined aluminium body, black anodised
-
Nitrile membrane resistant to E85 super ethanol
1 review89,90€Add to basketDelivery expected on Tuesday 3 February
If you order in the next 18 h and 26 min.
-
Fuel pumps, filters and regulatorsUniversal reinforced petrol pump compatible with Ethanol E85, Petrol and Diesel 340 l/H flow rate
Ethanol fuel pump:
- Flow rate: 340 litres / Hours
- Maximum pressure: 10 bars
- Weight: 360 grams
- Maximum engine power: 300/400 hp
- Total length: 120mm
- Suction diameter: 12mm
- Outlet diameter: 10mm
- Operating voltage: 6 to 18V
- Power consumption: 15 amps
- Compatible with Ethanol E85
- Compatible with petrol and diesel
-
Supplied with a fine sieve filter
2 reviews79,90€Add to basketDelivery expected on Tuesday 3 February
If you order in the next 18 h and 26 min.
-
Dash 4 fittings and hose AN4AN 4 45° fitting, black, for AN4 dash hose
Dash 4 45° fitting:
- Thread: AN4 = JiC7/16″ – 20 UNF
- Inside diameter: 5mm
- Material: CNC machined aluminium
- Black anodised
- Reusable
- Outstanding finish
- Temperature range: -80°C to + 550°C
- Maximum pressure: 60 bars
-
Double sealing lips
15,90€Add to basketDelivery expected on Tuesday 3 February
If you order in the next 18 h and 26 min.
-
Piping and clampsReinforced stainless steel trunnion clamp – T-Bolt Clamp – Width 19 mm – High pressure clamping – 7 diameters
Reinforced trunnion clamp (T-Bolt Clamp)
- 💪 Powerful, precise clamping – anti-unclamping
- 🧱 High-strength stainless steel
- 📏 1 9 mm width for maximum bearing surface
- 🔥 Ideal for cooling hoses & turbo piping
- ⚙️ Withstands high pressures
- 📐 Choice of 7 diameters
-
🏁 For road & racing use
5,49€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Tuesday 3 February
If you order in the next 18 h and 26 min.
-
Dash 10 fittings and hose AN10DASH 10 (AN10) Nylon Black – Multi-Fuel & Oil – 1 metre – Nitrile / Nylon Braided – High Resistance 68 Bar
DASH 10 (AN10) hose – Black braided nylon
- 📏 1 unit = 1 metre (delivered in one piece)
- 🛢️ Nitrile interior, multi-fuel & oil compatible
- 🔥 Resists petrol, diesel, oil, E85, water, air
- 🚗 Ideal for oil cooler, turbo return, low-pressure DA
- 🧰 Very flexible, quick & clean installation
- 🔧 Braided nylon coating → premium finish
-
🌡️ Temperature: -53°C to +150°C – Pressure: 68 bar (1000 psi)
21,90€Add to basketDelivery expected on Tuesday 3 February
If you order in the next 18 h and 26 min.
-
Fuel pumps, filters and regulatorsHand-operated primer and bleeder pump for diesel fuel systems, for 8 mm hose
Manual pump for priming fuel circuits:
- Compatible with all fuels (petrol, diesel, bioethanol, etc.)
- Strong, durable materials (rubber + aluminium)
- Ideal for vehicles, boats, lawnmowers, generators, etc.
- Length 15cm
- Supplied with 2 clamps
- 8mm tips
-
Easy to use, quick priming
11,90€Add to basketDelivery expected on Tuesday 3 February
If you order in the next 18 h and 26 min.
