Drills, Taps and Inserts
Showing 25–32 of 32 resultsSorted by popularity
-
Drills, Taps and InsertsDash 8 tap + die 3/4-16 UNF thread
Tap + Dash 8 die:
- Thread: 3/4-16 UNF
- In HSS treated steel
- Sold per tap + die set
-
Thread: DASH 8
84,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 68 h and 53 min.
-
Drills, Taps and InsertsPliers for M3 to M8 crimp inserts
Pliers for crimping inserts:
- For crimping threaded inserts
-
Sold with accessories from M3 to M8
41,88€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 68 h and 53 min.
-
Drills, Taps and Inserts40-piece tap and die set M3 to M12 metric and imperial threads
Set of taps and dies:
- 40-piece set
- 16 taps and dies from M3 to M12
- 1 tap and 1 die in 1/8 NPT
- Supplied with a thread-measuring comb
- Supplied with a screwdriver for fitting dies
- Widely used in the automotive industry
69,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 68 h and 53 min.
-
Drills, Taps and InsertsTungsten carbide reinforced tap drill – M6 x 1.0
Tungsten carbide tapping bit Ø6 mm – Drilling and tapping
- ⚙️ 2 in 1: drill and tap simultaneously
- 💪 Ideal for hardened steels, stainless steel, aluminium and hard metals
- 🔩 Diameter: 6 mm
- 🌀 High precision design – tungsten carbide
- 🧰 Compatible with drills, milling machines, lathes and pillar drills
- 💎 High resistance to heat and wear
-
🛠️ Sold individually – professional quality Discount Autosport
8,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 68 h and 53 min.
-
Drills, Taps and InsertsTap M14 × 1.5 – HSS high-speed steel – Metric fine thread
Tap M14 × 1.5 – HSS high-speed steel
- 📏 Thread: M14 × 1.5 (metric fine)
- ⚙️ Material: HSS (High Speed Steel)
- 🔩 Point: flat – bottom hole tap (not tapered)
- 💡 Use: creation or repair of internal threads
- 🧰 Manual or machine tool machining
- 🪛 Compatible with standard tap holders
- 📦 So ld individually
-
🕒 Professional quality – Discount Autosport
22,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 68 h and 53 min.
-
Drills, Taps and Inserts3-stone cylinder honing tool – 220 grit – Ø 50 to 180 mm with flexible shaft
Cylinder and boring honing tool – 3 stones 220 grit – Ø 50 to 180 mm
- Diameter range: adjustable from 50 to 180 mm
- Abrasive stone: 220 grit (fine)
- Flexible shaft: for standard drill or screwdriver
- Adjustable arms: self-tensioning honing arms
- Compatibility: engine blocks, cylinders, liners, callipers
-
Use: honing, de-icing, engine maintenance, preparation before segmentation
59,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 68 h and 53 min.
-
Drills, Taps and InsertsBrass wire brush with red handle, 25cm long
Brass wire brush:
- Cleaning your welds
- Cleaning your barbecue grill
- Cleaning wooden parts
-
Total length 25cm
11,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 68 h and 53 min.
-
Drills, Taps and InsertsTap + M4 tungsten carbide reinforced dies 0.5 / 0.7 pitch
Reinforced M4 tap and die set:
- Tungsten carbide
- External coating treated with brazed carbide
- For threading steels with a grade greater than 65° (hard stainless steels, high-alloy steels)
- Sold individually (1 tap + 1 die)
-
Choice of pitches 0.5 / 0.7
21,90€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Wednesday 10 December
If you order in the next 68 h and 53 min.
