Tools
Showing 37–48 of 60 resultsSorted by popularity
-
Drills, Taps and InsertsDash 10 tap + die 7/8-14 UNF thread
Dash 10 tap + die:
- Thread: 7/8-14 UNF
- In HSS treated steel
- Sold per tap + die set
-
Thread: DASH 10
-
Drills, Taps and Inserts
Dash 8 tap + die 3/4-16 UNF thread
Tap + Dash 8 die:
- Thread: 3/4-16 UNF
- In HSS treated steel
- Sold per tap + die set
-
Thread: DASH 8
-
Drills, Taps and InsertsPliers for M3 to M8 crimp inserts
Pliers for crimping inserts:
- For crimping threaded inserts
-
Sold with accessories from M3 to M8
-
Drills, Taps and Inserts40-piece tap and die set M3 to M12 metric and imperial threads
Set of taps and dies:
- 40-piece set
- 16 taps and dies from M3 to M12
- 1 tap and 1 die in 1/8 NPT
- Supplied with a thread-measuring comb
- Supplied with a screwdriver for fitting dies
- Widely used in the automotive industry
-
Workshop tools3L Manual Brake Drain Tool with Pump and Pressure Gauge – Auto Brake Drain – 1L Recovery Pot – Up to 4 Bar – Complete Kit
Professional manual brake bleeding tool
- 🧰 Manual pump with 3L pressure reservoir
- 📏 Integrated pressure control gauge
- 🔧 Bleeding possible alone without assistance
- 💧 1L liquid recovery pot included
- ⚡ Operating pressure up to 4 bar max
- 🧱 ABS body + robust silicone
- 🏁 Ideal for circuit & competition days
- 🚙 Compatible with most vehicles
-
📦 Complete kit ready for use
-
Drills, Taps and InsertsAdjustable Piston Ring Clamp 53-175mm with Key – Motor Ring Compressor
Adjustable piston ring clamp
- ⚙️ Clamping range 53 to 175 mm
- 🧰 Engine piston assembly tool
- 🔩 Allows compression of piston rings
- 🛠️ Clean installation in cylinders
- 🔑 Clamping key included
- 🚗 Suitable for car and motorbike engines
- 🏭 Mechanical workshop quality
- 📏 Wide piston diameter range
-
✅ Saves engine assembly time
-
Workshop toolsGap Tool M10 M12 M14 M16 + Set of Shims 0.04 to 0.88 mm – Precision Ignition Tuning
Spark plug gap adjustment tool + set of shims
- 🎯 Precise adjustment to avoid misfiring
- 🔧 Compatible with M10 / M12 / M14 / M16 spark plugs
- ⚙️ Allows you to adjust the gap easily and cleanly
- 📏 Set of shims included 0.04 mm to 0.88 mm
- 🏁 Essential for engine / turbo / E85 preparation
- 🧰 Compact tool to keep in the toolbox
-
✅ Improves stability at high revs and under pressure
-
Paint gunDA PRO Yellow / Green Paint Spray Gun – 1.3 mm nozzle – Paints & Varnishes – 600 ml jar
DA PRO paint spray gun – 1.3 mm nozzle
- 💧 Compatible with water & solvent-based paints
- 🧪 Professional quality stainless steel nozzle
- 🧴 600 ml jar
- 🎯 Wide & precise adjustable jet
- 🌬️ Air flow & paint fully adjustable
- 🧽 Easy cleaning – fully solvent compatible
-
🏁 Ideal for bodywork, varnishes & finishes
-
Drills, Taps and InsertsTungsten carbide reinforced tap drill – M6 x 1.0
Tungsten carbide tapping bit Ø6 mm – Drilling and tapping
- ⚙️ 2 in 1: drill and tap simultaneously
- 💪 Ideal for hardened steels, stainless steel, aluminium and hard metals
- 🔩 Diameter: 6 mm
- 🌀 High precision design – tungsten carbide
- 🧰 Compatible with drills, milling machines, lathes and pillar drills
- 💎 High resistance to heat and wear
-
🛠️ Sold individually – professional quality Discount Autosport
-
Seal and gasket kitKit of green FKM O-rings – Ø6 to Ø25 mm – 175 pcs – Viton fluorinated rubber – high resistance to oil and high temperatures
Kit of FKM Viton O-rings – Ø6 to Ø25 mm – 175 pieces – high resistance to oil and heat
- 🧰 175 fluorinated rubber FKM (Viton) O-rings
- ⚙️ Compatible with automotive, mechanical and industrial applications
- 💧 Excellent sealing on fluids, fuels and oils
- 📦 17 different sizes from Ø6 to Ø25 mm
- ♻️ Replaces conventional NBR seals
- 🌡️ Temperature: -20°C to +250°C
- 🕒 2-year warranty – Discount Autosport
-
🔥 Resistant to heat and engine oils/fuels
-
Drills, Taps and InsertsTap M14 × 1.5 – HSS high-speed steel – Metric fine thread
Tap M14 × 1.5 – HSS high-speed steel
- 📏 Thread: M14 × 1.5 (metric fine)
- ⚙️ Material: HSS (High Speed Steel)
- 🔩 Point: flat – bottom hole tap (not tapered)
- 💡 Use: creation or repair of internal threads
- 🧰 Manual or machine tool machining
- 🪛 Compatible with standard tap holders
- 📦 So ld individually
-
🕒 Professional quality – Discount Autosport
-
Drills, Taps and Inserts3-stone cylinder honing tool – 220 grit – Ø 50 to 180 mm with flexible shaft
Cylinder and boring honing tool – 3 stones 220 grit – Ø 50 to 180 mm
- Diameter range: adjustable from 50 to 180 mm
- Abrasive stone: 220 grit (fine)
- Flexible shaft: for standard drill or screwdriver
- Adjustable arms: self-tensioning honing arms
- Compatibility: engine blocks, cylinders, liners, callipers
-
Use: honing, de-icing, engine maintenance, preparation before segmentation
