12V and 24V quarter-turn battery isolator for motorhomes, trucks and tractors, 300 amp rating
300 amp circuit breaker with knob
Secure your vehicles by insulating your battery
Avoid discharges when your vehicle is stationary for long periods
The primary purpose of a circuit breaker is to ensure complete electrical isolation of a vehicle.
There are 3 reasons for this:
- In the event of an accident or incident, it is necessary to isolate a car’s electrical circuit to avoid a possible short-circuit.
- On vehicles with a wiring harness in poor condition, to avoid short circuits and fire outbreaks.
- For long-term parking, to avoid discharging the battery if it is lost.
Technical specifications:
- Maximum current: 300 amps
- Voltage: 0 to 32V
- 2 M10 power poles
- Quarter-turn knob
- For motorhomes, lorries, tractors
Widely used for camping cars, public works machinery and agricultural machinery.
You may also like…
-
Electric wire25mm2 flexible battery cable by the metre Red, Black
25mm2 battery cable:
- Diameter / cross-section: 25 mm2
- Maximum current: 190 amps
- Maximum voltage: 700V
- Temperature range: -50°C to +170°C
- Conductor material: Copper
- Outer sheath: PVC
- Resistant to hydrocarbons
-
Sold by the metre, adjust your quantity to receive a single length
1 review11,49€Select options This product has multiple variants. The options may be chosen on the product page
Delivery expected on Wednesday 14 May
If you order in the next 15 h and 32 min.
-
High power connectorsHigh power 2 way 120 amp 600V fast battery connector Anderson power products
High-power plug for starting:
- Quick connection
- Maximum current: 120 amps
- Crimp terminals with 25 to 35mm2 wire
- Widely used in competition, agriculture and industry
-
Sold in pairs: 2 connectors + 4 lugs, enough to make a complete connection
-
Electric sleeveRubber battery terminal covers, red and black 3 Sizes
Battery terminal covers:
- 3 sizes to choose from
- Protection against short circuits
- Used in automotive and industrial applications.
2 reviews3,50€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Wednesday 14 May
If you order in the next 15 h and 32 min.
-
Electrical terminalsRound copper terminal for earth braid diameter M5 to M12
Crimp terminals for earth braid:
- Diameters from M5 to M12
- Maximum voltage 600 volts
- Amperage from 10 to 300 amperes
- Wire cross-section from 1.5 to 70mm2
- To be crimped for your earthing braids
-
Sold by 2 units (1 pair)
2 reviews1,99€ – 4,49€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Wednesday 14 May
If you order in the next 15 h and 32 min.
Related products
-
Switches and switch padsPDM Gold style 8-button switch plate + FIA-certified 180 amp electronic circuit breaker
Machined aluminium 8-switch board + electronic circuit breaker:
- 2 circuit-breaker buttons +6 fixed switches +1 momentary switch
- FIA approved 180 amp circuit breaker
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 25 amps / switch
- Dimensions: 140 x 80 mm
- 5-axis machined plate in 6061 aluminium
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
- Supplied with full wiring diagram
- Simple, reliable and cost-effective
-
Equip your car like a factory WRC car or endurance prototype
-
Switches and switch padsPush button starter switch 12V 50 amps, with soft rubber cap
Momentary push button:
- Widely used for starter and horn
- Contact type: Momentary
- Max current: 50 amps
- No need for relays
- IP55 sealing
- 2 screw terminals for connection
- NO contact: Normally open
1 review -
Switches and switch pads3D Print PDM-style 8-button switch plate + FIA-certified 180-amp electronic circuit breaker
PCB with 8 3D printed switches + electronic circuit breaker:
- 2 circuit breaker buttons +6 fixed switches +1 momentary switch
- FIA approved 180 amp circuit breaker
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 25 amps / switch
- Dimensions: 140 x 80 mm
- 5-axis machined plate in 6061 aluminium
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
- Supplied with full wiring diagram
- Simple, reliable and cost-effective
-
Equip your car like a factory WRC car or endurance prototype
-
Switches and switch pads12-volt 25-amp pull switch for cars and motorbikes
Pull switch:
- Operating voltage: 2 to 28 volts
- Self-locking in position
- Temperature range: -30°C to +90°C
- Installation hole diameter: 10mm
- Tightness: IP65
-
Maximum current: 25 amps
