FIA Circuit Breaker & Fire Extinguisher Pull Cord – Length 2.50 m – Black Sheath – External Control – Competition Safety

Code: tirette-coupe-circuit-noire-2m50

FIA fire extinguisher pull cord – 2.50 m

  • 🔴 Operated from outside the vehicle
  • 🧯 Circuit breaker and fire extinguisher compatible
  • 🧵 Black sheath – high visibility red pull tab
  • 🔧 Simple mounting – robust cable clamp supplied
  • 📏 Total length 2.50 m
  • 🏁 Essential for competition & trackday
  • 🛡️ Safety compliant with FIA requirements

29,90

2 in stock (can be backordered)

2 in stock (can be backordered)

🚚

Delivery expected on Thursday 25 December

If you order in the next 4 h and 59 min.

FIA control pull cord for remote activation of a circuit breaker from outside the vehicle to stall the engine and switch off all electrical devices.


Can also be connected to a fire extinguisher for rapid activation in an emergency.

This FIA fuse/extinguisher pull cord is designed to meet the safety requirements of motor racing.

Installed on the outside of the vehicle, it can :

  • switch off the engine immediately
  • deactivate the general electrical supply
  • activate an on-board fire extinguisher if necessary.

The red pull tab ensures immediate identification in line with competition standards, while the black sheath effectively protects the cable while fitting discreetly into the engine compartment or passenger compartment.

The system is supplied with a sturdy cable clamp, ensuring a reliable and durable fit, even in a racing environment.

➡️ This model is available in an overall length of 2.50 m, ideal for vehicles requiring a longer cable run between the engine area, passenger compartment and exterior.


📐 Technical specifications

  • Type: Circuit breaker / fire extinguisher pull cord
  • Compliance: Competition use (FIA)
  • Total length: 2.50 m
  • Pull cord colour: Red
  • Sheath colour : Black
  • Pull cord body diameter: M12
  • Required drilling diameter: 12 mm
  • Fixing: Robust cable clamp supplied
  • Mounting: Inside / outside the vehicle

🧰 Applications

  • Main circuit breaker (FIA external control)
  • On-board fire extinguisher
  • Competition vehicles
  • Trackday, rally, drift, circuit
  • Prototypes & racing cars
  • Vehicles subject to FIA regulations

🔧 Installation advice

  • Install the pull tab on the outside, within easy reach
  • Drill a Ø12 mm hole for the passage
  • Check that the cable runs smoothly without sharp edges
  • Fasten securely with the cable clamp supplied
  • Test operation before each use

Product benefits

  • ✅ Circuit-breaker control from the outside
  • ✅ Fire extinguisher compatible
  • ✅ FIA high visibility (red pull tab)
  • ✅ Resistant and discreet black sheathing
  • ✅ Length adapted to complex assemblies
  • ✅ Simple and robust assembly
  • ✅ Complies with FIA competition requirements
  • ✅ Discount Autosport professional quality
Weight 0,8 kg

You may also like…

  • Resistor in porcelain for 12V circuit breaker 10 watts 3.3 ohm
    Switches and switch pads

    Resistor in porcelain for 12V circuit breaker 10 watts 3.3 ohm

    Circuit breaker resistor:

    • 3.3 ohm resistor
    • 10 watts
    • 6 to 24 volts
    • Porcelain body
    1 review
    4,90
    🚚

    Delivery expected on Thursday 25 December

    If you order in the next 4 h and 59 min.

    Add to basket
  • Resistor for circuit breaker / battery 10 watts 3 ohm CNC machined body gold
    Switches and switch pads

    Resistor for circuit breaker / battery 10 watts 3 ohm CNC machined body gold

    Circuit breaker resistor:

    • 3 ohm resistor
    • 10 watts
    • 6 to 24 volts
    • CNC machined
    • Gold anodised
    • Drilled for mounting
    • Lugs drilled to accept soldering wire
    2 reviews
    4,90
    🚚

    Delivery expected on Thursday 25 December

    If you order in the next 4 h and 59 min.

    Add to basket