100 FDD 6.3mm flat terminals

Connect your wires and appliances.

Technical specifications:

• Material: silver-plated copper
• Maximum voltage: 48 volts
• Maximum current: 30 amps

These terminals are designed to accept wire from 0.75 mm2 to 2 mm2.

As a general rule, when crimping a terminal onto a wire, we recommend that you always solder it with tin in addition to crimping.

This provides much better electrical conductivity, but also better mechanical strength. In the event of tension, the wires won’t pull out of the terminals.

For foolproof insulation, opt for heat-shrink tubing to cover your crimp + solder.