Lever circuit breaker battery isolator for negative terminal 6V, 12V and 24V for motorhomes, trucks, tractors, current 300 amps
Lever circuit breaker for negative terminal 300 amperes
Secure your vehicles by insulating your battery
Avoid discharges when your vehicle is stationary for long periods
The primary purpose of a circuit breaker is to ensure complete electrical isolation of a vehicle.
There are 3 reasons for this:
- In the event of an accident or incident, it is necessary to isolate a car’s electrical circuit to avoid a possible short-circuit.
- On vehicles with a wiring harness in poor condition, to avoid short circuits and fire outbreaks.
- For long-term parking, to avoid discharging the battery if it is lost.
Technical specifications:
- Maximum current: 300 amps
- Voltage: 0 to 32V
- Lever blade
- For cars, motorhomes, lorries, tractors
Widely used for campers, public works and agricultural machinery.
| Weight | 0,6 kg |
|---|
You may also like…
-
Switches and switch padsFIA Cut Off switch electronic 180 amps 12 volts FIA approved waterproof IP67
180 amp electronic circuit breaker:
- Circuit breaker controlled by 2 switches
- Can be fitted in place of a conventional circuit breaker
- Simple, reliable installation (no on-board electronics)
- IP67 sealed switches
- IP67 sealing (Fully sealed)
- Operating voltage: 6 to 48 volts
- Brand: Discount Autosport
- Designed, developed and assembled in-house
- Wiring diagram included
-
Delivered as a complete kit
1 review179,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 10 min.
-
Electric sleeveRubber battery terminal covers, red and black 3 Sizes
Battery terminal covers:
- 3 sizes to choose from
- Protection against short circuits
- Used in automotive and industrial applications.
3 reviews3,50€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Wednesday 10 December
If you order in the next 69 h and 10 min.
-
Electrical terminalsRound copper terminal for earth braid diameter M5 to M12
Crimp terminals for earth braid:
- Diameters from M5 to M12
- Maximum voltage 600 volts
- Amperage from 10 to 300 amperes
- Wire cross-section from 1.5 to 70mm2
- To be crimped for your earthing braids
-
Sold by 2 units (1 pair)
2 reviewsPrice range: 1,99€ through 4,49€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Wednesday 10 December
If you order in the next 69 h and 10 min.
-
Switches and switch pads6-pole battery switch 12 volts 100 amps FIA + resistor
6-pole FIA circuit breaker:
- Voltage range: 0 to 27V
- Mechanical contact
- 2 power poles
- 4-pole contact
- Meets FIA standards
-
Maximum voltage: 100 amps
24,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 10 min.
Related products
-
Switches and switch padsPolarity reversing lever switch 6 terminals 12 volts
12-volt reversing switch:
- 3 positions ON – OFF – ON
- Self-holding in position
- Voltage range: 2 to 250 volts
- Maximum current: 15 amps
- Temperature range: -30°C to +90°C
- Installation hole diameter: 12mm
- Tightness: IP65
-
3 positions with dead centre
2 reviews14,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 10 min.
-
Switches and switch padsResistor for circuit breaker / battery 10 watts 3 ohm CNC machined body gold
Circuit breaker resistor:
- 3 ohm resistor
- 10 watts
- 6 to 24 volts
- CNC machined
- Gold anodised
- Drilled for mounting
- Lugs drilled to accept soldering wire
2 reviews4,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 10 min.
-
Switches and switch padsBlue PDM-style 8-button switch plate + FIA-certified 180-amp electronic circuit breaker
Machined aluminium 8-switch board + electronic circuit breaker:
- 2 circuit-breaker buttons +6 fixed switches +1 momentary switch
- FIA approved 180 amp circuit breaker
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 25 amps / switch
- Dimensions: 140 x 80 mm
- 5-axis machined plate in 6061 aluminium
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
- Supplied with full wiring diagram
- Simple, reliable and cost-effective
-
Equip your car like a factory WRC car or endurance prototype
369,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 10 min.
-
Switches and switch pads8 round switch panel PDM look “Switch Panel” 25 amps 12 volts Discount Autosport 3D Printed
8-switch board, PDM look:
- 7 fixed, 1 momentary
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 20 amps / switch
- Dimensions: 140 x 80 mm
- Rigid 3D printed circuit board
- Temperature range: -40°C to +90°C
- Total weight: 150 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
-
Simple, reliable and cost-effective
124,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 10 min.
