Shop
Showing 277–288 of 1148 resultsSorted by popularity
-
Rectangle and Arrow LEDLong LED ceiling strip – 36W/m – 230V – Cool white 6500K – individually or in series
Long LED strip – 36W/m – 230V – Cool white 6500K
- ⚙️ Customisable length: from 1 m to 50 m and more (can be clipped together)
- 💡 6500K cool white lighting – 4320 lumens per metre
- 🔌 Direct 230V connection – no transformer required
- 🧩 Bars “clip” together to form a continuous line
- 🏋️♂️ Ideal for sports halls, workshops, restaurants, offices, bars
- 📘 Installation, fitting and connection instructions are supplied with the lamp.
- 🕒 2-year guarantee – Discount Autosport
- 📦 Sold as a complete kit ready to assemble.
-
Make up the length you want by adjusting the quantity in your basket
-
Glues and epoxySilicone Motor Joint Paste Black 50g RTV +340°C high temperature
Black motor joint compound 50g :
- RTV silicone = cures at room temperature
- Colour: Black
- Gap filling: up to 6mm
- Drying time: 10 minutes
- Temperature range: -55°C to +340°C
- High rust resistance
- Very high chemical resistance
- Resistant to all types of hydrocarbons
-
High temperature +340°C
-
Glues and epoxy300ml clear strong underwater glue for swimming pools and aquariums with brush for application
Aquatic underwater glue:
- Colour: transparent
- Pot size: 300ml
- Supplied with an application brush
- Optimum drying time: 1 minute
- Temperature range: 20°C to +55°C
- High chemical resistance
-
Dries under water
-
Probes and sensorsContact temperature sensor 65°C 12V M14 x 1.5
Thermal contact probe:
- Contact temperature: 65°C
- Thread M14 x 1.5
- For cooling circuit
-
Dash 8 fittings and hose AN8Dash 8 fitting 90° black for dash 8 hose
Dash 8 90° fitting
- Internal diameter: 12.7mm.
- 3/4″ – 16 UNF JIC thread.
- For an outstanding finish.
- Black anodised finish.
- Temperature range: -80°C to + 550°C
- Maximum pressure: 60 bar
-
Double lip seal
1 review -
Glues and epoxyTransparent two-component epoxy adhesive 2 tubes + gun + 4 nozzles
2-tube clear epoxy kit:
- Supplied with an application gun
- 4 mixing nozzles
- Two-component ultra-strong adhesive
- Transparent colour
- High chemical resistance
- Volume: 50ml
-
Dries in 5 minutes
-
Brother label maker and tapesAZe-231 12mm black on white tape cassette for Brother P-touch labeller
12mm tape cassette:
- For Brother labeller
- Tape cassette type AZE-231
- Width: 12mm
- Length 8 metres
- Black on white
- Adhesive + label resistant to chemicals (petrol, alcohol, motor oil, etc.)
- -50°C to +120°C
-
Sold individually
-
Fasteners Protections and fixingsCable marker rings 0 to 9 100 pieces 10 colours for wire 2 to 4mm2
Cable marker numbers:
- Colour and number marking
- Sold in packs of 100.
- Easy assembly, no pliers required
- For wire diameters from 2 to 4mm 2
-
Gauges 12 Volts12 volt manometer hour meter Agricultural, Marine, Industrial
12-volt hour meter:
- Gauge diameter: 52mm
- Acceptable voltage range: 6 to 80V
- We recommend a power supply with a fuel pump +.
- 2 flat lugs 5mm on the back
- Maximum capacity 99999 hours = 11.4 full years
- Be careful to respect the polarity when connecting
-
Count the running time of your equipment with certainty
-
Gauges 12 VoltsTurbo pressure gauge -1 to +2 bar with probe, diameter 52mm
Needle-type turbo pressure gauge:
- Pressure range -1 to +2 bar
- 52mm diameter
- Voltage range: 9 to 16 volts
- Easy to fit pressure gauge
- Simple electrical connection
-
Supplied with pneumatic pressure sensor + wiring harness and wiring diagram.
-
Fasteners Protections and fixings30mm screw-in aluminium bulkhead for wiring harness and hoses
2-part aluminium bulkhead feed-through:
- Inside diameter 30mm
- Machined in 6061 aluminium
- Black anodised
- M8 screws
- External diameter 70mm
-
Rounded machining of internal passage
-
Motorcycle electrical harnessCircuit breaker engine stop button for Japanese motocross bikes Yamaha, Kawasaki, Suzuki, Honda
Motorbike circuit-breaker button:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 30 amps
- Momentary button
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 30cm long harness with PVC sheath
- For Japanese motocross bikes
-
Yamaha, Kawasaki, Suzuki, Honda
