Shop
Showing 325–336 of 1148 resultsSorted by popularity
-
Drills, Taps and InsertsPack of 10 Ø125 mm “Flap” grinding discs – 80 grit – professional abrasive for steel, stainless steel and aluminium
10 “Flap” grinding discs Ø125 mm – grit #80
- 💪 High-performance abrasive for steel, stainless steel and aluminium
- ⚙️ Medium grit #80 – perfect balance between power and finish
- 🌀 Standard diameter 125 mm compatible with all grinders
- 🔥 High wear resistance – extended service life
-
🧰 Sold in packs of 10 discs
-
ConnectorsCase of 1 to 4 way 12 volt Yamaha electrical connectors for Japanese motorbikes 136 pieces
Connectors for Yamaha motorbikes:
- Maximum current: 20 amps
- Maximum voltage: 48 volts
- Temperature range: -40°C to 90°C
- 2 to 6 channels
-
136-piece case
1 review -
Workshop tools0-20 bar engine compression tester + accessory kit
Compression tester + accessory kit:
- Operating range 0-20 bar
- 2 Rigid tips with rubber cone
-
M10 / M12 / M14 / M18 spark plug ends
-
Silicon and Multifuel hoseSilicone cap plug Red for cooling circuit, engine oil diameter 6 to 40mm Length 3cm
Silicone plug cap:
- 6mm to 40mm
- 16 sizes available
- Made of double-layer silicone + fibre reinforcement
- Temperature range: -40°C to +170°C
- Maximum pressure 16 Bar
- Abrasion and wear resistance
- Resistant to automotive fuels including E85, engine oils and coolants
- Resistant to all types of automotive and HGV fluids
- Sold individually
-
The diameter shown is the inside diameter
Price range: 4,69€ through 7,69€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Tuesday 3 February
If you order in the next 6 h and 43 min.
-
Silicon and Multifuel hoseFlexible red silicone hose for cooling circuit, engine oil 8 to 18mm Length 1 metre
Flexible silicone hose:
- 8mm to 18mm
- Made of double-layer silicone + fibre reinforcement
- Temperature range: -40°C to +170°C
- Maximum pressure 16 Bar
- Abrasion and wear resistance
- Resistant to automotive fuels including E85, engine oils and coolants
- Resistant to all types of automotive and HGV fluids
- The diameter shown is the inside diameter
-
Sold by the metre, adjust your quantity to receive a single length.
1 reviewPrice range: 9,90€ through 15,90€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Tuesday 3 February
If you order in the next 6 h and 43 min.
-
Paint gunSpray gun for primer and body filler 1.7 mm nozzle
Primer spray gun:
- Operating pressure: 1 to 10 bar
- Adjustable paint flow
- Adjustable air flow from 190 to 250ml/minute
- Adjustable output beam opening from 210 to 400mm
- Fully solvent cleanable
- 1.7mm nozzle
- Jar capacity: 600ml
- 1/4″ air hose connection
-
For spray primers and sealants
-
Drills, Taps and InsertsReinforced tungsten carbide drill bit diameter 8mm
Reinforced depointer bit 8mm:
- Materials: Tungsten carbide
- External coating treated with braised carbide, very hard
-
Widely used in bodywork
-
Drills, Taps and InsertsRatchet spanner for taps of all sizes
Ratchet spanner for taps:
- Taps M3 to M8
- Tightening chuck
- Robust chromoly steel
-
Drills, Taps and InsertsAssortment of 3 tungsten carbide step drills
3 Tungsten carbide step drills:
- Suitable for metals
- Drilling, chamfering, deburring
1 review -
Electrician tools2000W 230V heat gun 60°C to 600°C
2000W heat gun:
- Voltage: 230V
- Power: 2000W
- 1.5m wire
- Supplied with 4 metal nozzles
-
Temperature from 60°C to 600°C
-
Fuel pumps, filters and regulatorsFuel pressure gauge + fittings
Fuel pressure tester:
- 0 to 7 bar scale
- Supplied with several connections
- 9.49mm / 7.89mm / 6.3mm
-
Measure your fuel pressure
1 review -
Glues and epoxy5 Nozzles 10:1 for two-component epoxy for stone and minerals
Two-component nozzles:
- Mixing ratio 10:1
- Mixing tip for adhesive and hardener
- Single use
- Output diameter 2mm
-
Sold in packs of 5
