Shop
Showing 349–360 of 1102 resultsSorted by popularity
-
Dash AN Adapters, weld bungs & connectorsDash 6 black air vent check valve
Dash 6 non-return valve:
- Internal diameter: 9.56mm.
- Thread JIC 9/16″ – 18 UNF.
- Black anodised finish.
-
Suitable for all types of hydrocarbons.
11,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 60 h and 9 min.
-
Dash 8 fittings and hose AN8Dash 8 connector 45° black for dash 8 hose
Dash 8 45° fitting
- Internal diameter: 12.7mm.
- 3/4″ – 16 UNF JIC thread.
- For an outstanding finish.
- Black anodised finish.
- Temperature range: -80°C to + 550°C
- Maximum pressure: 60 bar
-
Double lip seal
24,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 60 h and 9 min.
-
Paint gunDA PRO Blue paint spray gun 1.3mm nozzle for paints and varnishes
DA Pro Blue paint spray gun, for painters and bodywork specialists.
- Operating pressure: 1 to 10 bar
- Adjustable paint flow
- Adjustable air flow from 190 to 250ml/minute
- Adjustable output beam opening from 210 to 400mm
- Fully solvent cleanable
- 1.7mm nozzle
- Jar capacity: 600ml
- 1/4″ air hose connection
- Excellent results with water-based paints and direct glosses.
- Perfect finish with varnishes.
- Fine atomisation.
- 1.3mm nozzle.
-
Suitable for solvent-based and solvent-free paints.
-
Drills, Taps and InsertsDash 6 tap + die 9/16-18 UNF thread
Dash 6 tap + die:
- Thread: 9/16-18 UNF
- In HSS treated steel
- Sold per tap + die set
-
Thread: DASH 6
59,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 60 h and 9 min.
-
Drills, Taps and Inserts
Dash 4 tap + die 7/16-20 UNF thread
Dash 4 tap + die:
- Thread: 7/16-20 UNF
- In HSS treated steel
- Sold per tap + die set
-
Thread: DASH 4
49,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 60 h and 9 min.
-
Drills, Taps and InsertsPliers for crimping inserts + 80 inserts M3 to M8
Pliers + crimping inserts:
- 80 inserts ranging from M3 to M8
- Crimping tool
-
Sold with accessories from M3 to M8
53,88€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 60 h and 9 min.
-
Drills, Taps and InsertsAluminium crimp inserts, M3, M4, M5, M6, M8 Case 100 pcs.
Crimp inserts 100 pcs:
- M3: 30 pieces
- M4: 30 pieces
- M5: 20 pieces
- M6: 10 pieces
- M8: 10 pieces
-
To be crimped with special pliers
17,88€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 60 h and 9 min.
-
Fuel pumps, filters and regulatorsUniversal reinforced fuel pump compatible with Ethanol E85, Petrol and Diesel Large flow rate 525 l/H
Ethanol fuel pump:
- Flow rate: 525 litres / Hours
- Maximum pressure: 10 bars
- Weight: 450 grams
- Maximum engine power: 500/550 hp
- Total length: 124mm
- Inlet diameter: 12mm
- Outlet diameter: 10mm
- Operating voltage: 6 to 18V
- Power consumption: 20 amps
- Compatible with Ethanol E85
- Compatible with petrol and diesel
-
Supplied with a fine sieve filter
84,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 60 h and 9 min.
-
Additives and greasesLoctite LB 8009 High temperature nickel rust proof grease 1315°C 510gr anti seize
Loctite LB 8009 high temperature grease:
- Resistant up to 1315°C
- Anti-Seize = Anti-Seize
- Nickel and graphite based
- Multi-material compatibility
- Anti-seize for shafts, bores and threads.
- Facilitates assembly of stainless steel threads
- Highly resistant to environments and chemicals
- High anti-rust power
- 510 gr. jar
- Official Henkel France supply
-
Cap with application brush
84,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 60 h and 9 min.
-
Brother label maker and tapesAZe-631 12mm black on yellow tape cassette for Brother P-touch labeller
12mm tape cassette:
- For Brother labeller
- Tape cassette type AZE-631
- Width: 12mm
- Length 8 metres
- Black on yellow
- Adhesive + label resistant to chemicals (petrol, alcohol, motor oil, etc.)
- -50°C to +120°C
-
Sold individually
1 review10,08€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 60 h and 9 min.
-
Switches and switch padsButton 12V circuit breaker with cord for Karting Quad Snowmobiles and Outboard Boats
12V circuit breaker:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 20 amps
- Temperature range: -40°C to +90°C
- Installation hole diameter: 12mm
- Easy 2-wire connection
-
Secure your motorised vehicles
12,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 60 h and 9 min.
-
Switches and switch padsSquare circuit breaker engine stop button for Japanese motocross bikes Yamaha, Kawasaki, Suzuki, Honda
Motorbike circuit-breaker button:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 30 amps
- Momentary button
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 30cm long harness with PVC sheath
- For Japanese motocross bikes
-
Yamaha, Kawasaki, Suzuki, Honda
8,39€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 60 h and 9 min.
