Shop
Showing 697–708 of 1102 resultsSorted by popularity
-
ConnectorsElectrical connectors AMP Superseal pre-wired 1 to 6 way 12 volts sold by 5 pieces
Pre-wired waterproof AMP connectors:
- Operating voltage: 0 to 24V
- 7 amps per connection pin
- Wire cross-section: 1mm2
- Wire length: 15cm
- Matching wire colours between connector pairs
- IP67 insulation rating (against dust and water)
- Slot for sliding bracket
- Operating temperature : -25°C to +150°C
-
Easy to connect
Price range: 12,90€ through 29,90€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Wednesday 10 December
If you order in the next 57 h and 50 min.
-
Switches and switch padsZener diode with one-way pass 12 Volts
Zener diode:
- Voltage: 12 Volts
- Transmissive in one direction only
- Length: 6cm
-
To be tested with a multimeter to determine the direction of passage
0,99€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 57 h and 50 min.
-
WeldingTorch for wp9 ECO tig welding unit
WP9 ECO TIG torch:
- Hose swivel joint
- Maximum amperage: 125 amps
- Air cooling
47,88€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 57 h and 50 min.
-
WeldingTorch for wp9 TIG welding unit with flexible joint
WP9 TIG torch:
- Maximum amperage: 125 amps
-
Hose swivel joint
59,88€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 57 h and 50 min.
-
WeldingAssortment of 45 TIG welding nozzles for steel, aluminium and stainless steel
Complete kit to equip your TIG station:
- Compatible with electrodes from 0.5 to 3.2mm diameter
- Nozzles from 3 to 10 L/min
- 3 caps of different lengths
- 4 LENS-type screen nozzles
-
Comprising 45 parts
69,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 57 h and 50 min.
-
Measuring devicesBrake bleeder with manual vacuum pump + reservoir and accessories
Brake bleeder tool:
- Manual vacuum pump
- 2 jars of fluid
- Nozzles
-
Complete kit ready to use
54,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 57 h and 50 min.
-
Paint gunVelcro foam interface pad for 150mm 6 inch orbital sander
Interface pad for sander:
- Thickness: 1cm
- Soft Velcro fastening on one side
- Hard Velcro fastening on other side
- Central hole
- 14 small holes
-
Diameter 150mm / 6 inches
9,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 57 h and 50 min.
-
Electrician toolsHSC8 6-6A+ crimping tool, set of 1020 0.5mm2 to 4mm2 electrical terminals E508, E1008, E1508, E2508, E4009
Crimping tool for round terminals:
- Pliers from 0.25 to 4mm2
- Box of 1020 terminals
- 3 colours of terminals
- Blue, Yellow, Red
- Type E terminals
- Kit sold complete with pliers + terminals
-
Easy crimping
44,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 57 h and 50 min.
-
IntakeBMW M50 / M52 Turbo aluminum intake manifold – complete black kit with 90mm throttle body + fuel rail
M50, M52 turbo intake manifold:
- Material: TIG-welded aluminium
- Weight: 3kg
- Maximum turbo pressure: 2.5 Bar
- Butterfly valve diameter 90mm
- High-flow injector rail with Dash 6 connections
- 4 1/8 NPT holes underneath for tapping your pressure sensors
- Fitting for original idle valve
- Gloss black finish
-
Complete kit ready to install
-
ExhaustStainless steel exhaust manifold for BMW E36 6 cylinders, 320I, 323I, 325I, 328I and M3
Stainless steel exhaust manifold for M50, M52 and S50:
- Total weight of manifold: 6kg
- Material: 304L stainless steel
- Bright polished finish
- 2 slots for original lambda sensors
- Power gain of around 5-10hp depending on the condition of your engine
- Supplied with new gaskets as required
- Screw-on connecting flanges for the original exhaust system
-
Fitted in place of the original
299,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 57 h and 50 min.
-
Angle kits for driftingWide angle kit for BMW E30 drift
Wide Angle Drift kit:
- Steering angle: 74
- Weight of complete kit: 10kg
- Adjustable caster angle
- Track widened by 5cm on each side (+10cm in total)
- Ackerman effect adjustable in 3 positions
- Neutral Ackerman position
- Positive Ackerman position
- Negative Ackerman position
- Roll centre raised by 35mm
- 3 turns of steering wheel from stop to stop
- All ball joints are reinforced
- Supports for anti-roll bar
- Reinforced steel axles
- 18″ x 8.5″ wheels available
Disconcertingly easy to drive
599,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 57 h and 50 min.
-
Angle kits for driftingLock angle kit for BMW E46 drift
Wide Angle Drift kit:
- Steering angle: 74
- Weight of complete kit: 10kg
- Adjustable caster angle
- Track widened by 5cm on each side (+10cm in total)
- Ackerman effect adjustable in 3 positions
- Neutral Ackerman position
- Positive Ackerman position
- Negative Ackerman position
- Roll centre raised by 35mm
- 3 turns of steering wheel from stop to stop
- All ball joints are reinforced
- Supports for anti-roll bar
- Reinforced steel axles
- 18″ x 8.5″ wheels available
Disconcertingly easy to drive
599,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 57 h and 50 min.
