Extra strong glue for cylinder head gasket 59ml

Code: abro-culasse

Glue for cylinder head gaskets:

  • Cap with pom-pom applicator
  • Volume: 59ml
  • Temperature range: -55°C to + 210°C
  • Resistant to hydrocarbons
  • Petrol, Diesel, E85, Engine oil, Coolant
  • For competition and vintage vehicles
  • Increases resistance to pressure and temperature

19,90

47 in stock

47 in stock

Based on 6 reviews

See reviews

Cylinder head gasket adhesive


For organic gaskets, metal tri-folds, copper, stainless steel rings

Glue your cylinder head gasket to increase the seal between the block and cylinder head

Helps reduce pressure resistance in the cooling circuit.

An organic gasket increases resistance to pressure and temperature by 10%.

Specially adapted for:

  • Competition vehicles subject to high stresses (high pressure and high temperatures)
  • Older cars with fragile engine architectures and a tendency to blow a cylinder head gasket the first time they overheat.

Method of application:

  1. Apply glue with the pom-pom to your cylinder head and block
  2. Apply glue to the 2 sides of the cylinder head gasket
  3. Leave to dry for 2 minutes
  4. Fit and tighten the cylinder head to the correct torque
  5. Wait 6 hours before starting the engine for the first time

Technical specifications:

  • Volume: 59ml
  • Temperature range: -55°C to + 210°C
  • Resistant to hydrocarbons
  • Petrol, Diesel, E85, Engine oil, Coolant
Weight 0,2 kg

You may also like…

Reviews about product
0
1★
1
2★
0
3★
2
4★
3
5★
8.3/10


Based on 6 reviews

  • Hubert N.
    Published on 28 December 2024 at 19h16 (Order date: 20 December 2024 at 22h25)
    4

    super plus…….

    (Translated review)
  • Ivica B.
    Published on 22 December 2024 at 9h50 (Order date: 10 December 2024 at 6h24)
    5

    Top Produkt

    (Translated review)
  • Cdbhru f.
    Published on 13 November 2024 at 14h52 (Order date: 8 November 2024 at 9h36)
    5

    Very good product ideal I recommend for swap!!!!!

    (Translated review)
  • hoarau y.
    Published on 21 February 2024 at 4h28 (Order date: 21 November 2023 at 1h00)
    5

    Excellent product

    (Translated review)
  • Frédéric D.
    Published on 20 February 2024 at 15h08 (Order date: 14 February 2024 at 17h04)
    4

    Compliant product

    (Translated review)
  • Paulin D.
    Published on 13 February 2024 at 23h47 (Order date: 27 September 2023 at 2h00)
    2

    Not great .dries too fast 1st try of this glue, honestly not great, it dries in the time it takes to say it while I couldn’t do the other side of the cylinder head gasket, maybe I got a bad batch or too old, I don’t know, loctite 3020 is much better in spray.
    I won’t use this glue again, sorry,

    (Translated review)