Polarity reversing lever switch 6 terminals 12 volts
12-volt reversing switch:
- 3 positions ON – OFF – ON
- Self-holding in position
- Voltage range: 2 to 250 volts
- Maximum current: 15 amps
- Temperature range: -30°C to +90°C
- Installation hole diameter: 12mm
- Tightness: IP65
-
3 positions with dead centre
14,90€
7 in stock7 in stock
6-terminal changeover switch
Used to operate a device in either direction
Useful for a 4×4 electric winch or a boat ink motor
3 positions: ON – OFF – ON
Technical specifications:
- Operating voltage: 2 to 250 volts
- Maximum acceptable current: 15 amps
- 3 positions with neutral in the middle
- Self-locking in position
- Temperature range: -30°C to +90°C
- Installation hole diameter: 12mm
- Tightness: IP65
Fitted with position identification plate
| Weight | 0,1 kg |
|---|
You may also like…
-
Switches and switch pads12V 25 Amp “Toggle Switch” for electrical circuits
12V ON / OFF switch:
- Max voltage: 48 volts
- Silver inner contact
- Supplied with rubber cap
- 4.8mm flat terminals
-
Max current: 25 amps
2 reviews
Reviews about product
-
jean michel O.
Published on 14 December 2024 at 11h29 (Order date: 6 December 2024 at 16h27)not yet installed
(Translated review) -
GRAND M.
Published on 13 February 2024 at 17h36 (Order date: 22 May 2023 at 0h00)fragrant product
(Translated review)
Related products
-
Switches and switch padsCNC Gold starter plate 8 round aluminium switches PDM “Switch Panel” look 25 amps 12 volts
Machined aluminium 8-switch board:
- 7 fixed, 1 momentary
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 25 amps / switch
- Dimensions: 140 x 80 mm
- 5-axis machined plate in 6061 aluminium
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
- Supplied with full wiring diagram
-
Free colissimo delivery!
-
Simple, reliable and cost-effective
-
Switches and switch padsPush button engine start LED starter switch 12V 50 amps
Engine Start button:
- Widely used for starter
- Contact type: Momentary
- Max current: 50 amps
- No need for relays
- IP55 sealing
- 2 screw terminals for connection
- NO contact: Normally open
-
LED backlight
1 review -
Switches and switch pads3D Print PDM-style 8-button switch plate + FIA-certified 180-amp electronic circuit breaker
PCB with 8 3D printed switches + electronic circuit breaker:
- 2 circuit breaker buttons +6 fixed switches +1 momentary switch
- FIA approved 180 amp circuit breaker
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 25 amps / switch
- Dimensions: 140 x 80 mm
- 5-axis machined plate in 6061 aluminium
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
- Supplied with full wiring diagram
- Simple, reliable and cost-effective
-
Equip your car like a factory WRC car or endurance prototype
-
Switches and switch padsBlue PDM-style 8-button switch plate + FIA-certified 180-amp electronic circuit breaker
Machined aluminium 8-switch board + electronic circuit breaker:
- 2 circuit-breaker buttons +6 fixed switches +1 momentary switch
- FIA approved 180 amp circuit breaker
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 25 amps / switch
- Dimensions: 140 x 80 mm
- 5-axis machined plate in 6061 aluminium
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
- Supplied with full wiring diagram
- Simple, reliable and cost-effective
-
Equip your car like a factory WRC car or endurance prototype
