Pre-wired electrical connector for Bosch LSU 4.9 lambda sensor – ref. 0258017025
Pre-wired electrical connector for Bosch LSU 4.9 lambda sensor
Replace or repair the plug on your Bosch LSU 4.9 lambda sensor with this complete OEM compatible Bosch connector ref. 0258017025.
Designed to provide a reliable, waterproof and durable connection, it is pre-wired.
This connector is used on many German makes (VW, Audi, BMW, Mercedes, Porsche) as well as on adaptable richness control systems (AEM, Innovate, PLX, etc.).
This connector is a faithful reproduction of the Bosch 0258017025 model , widely used in the automotive industry.
It incorporates a lateral pin lock, ensuring a firm and secure hold of the electrical terminals, even in vibrating and hot environments.
⚙️ Extended compatibility:
- Bosch LSU 4.9 probes
- UEGO AEM systems , Innovate LC2/MTX-L, PLX, 14point7, etc.
- Vehicles: Volkswagen, Audi, BMW, Mercedes, Porsche
- Can be used on all Bosch 4.9 compatible engine management systems
⚙️ Technical specifications :
- Connector type: Bosch LSU 4.9 (0258017025)
- Number of channels: 6 pins
- Internal locking: side locking with pin lock
- Material: high temperature resistant polymer
- Protection: IP67 – waterproof and dustproof
- Operating temperature: -40°C to +150°C
- Supplied pre-wired
⚡ Applications:
- 🚗 Bosch 4.9 OEM lambda sensor connector replacement.
- 🏁 Universal richness controllers (AEM, Innovate, PLX, etc.)
- 🔧 Renovation of performance or competition engine harnesses.
- 💡 Conversion or adaptation of injection systems
✅ Product benefits :
✅ 100% Bosch LSU 4.9 compatibility – ref. 0258017025
✅ Delivered pre-wired
✅ Lateral pin lock for secure connection
✅ IP67 protection against water and dust
✅ Resistant to heat, vibration and hydrocarbons
✅ Compatible with OEM vehicles and universal controllers (AEM, Innovate, etc.)
| Weight | 0,2 kg |
|---|
You may also like…
-
ConnectorsCrimp terminal for connecting 2 wires, 200 pcs
Crimp terminal for connecting 2 electrical wires:
- Ideal for operations that are difficult to access.
- Made of brass for perfect conductivity.
- Sold in packs of 200 pcs.
- Crimp then solder for a perfect electrical connection
4 reviews7,90€Add to basketDelivery expected on Wednesday 17 December
If you order in the next 50 h and 56 min.
-
Electric sleeveHeat-shrinkable fabric tubing Diameter 4 to 40mm length 1 metre
Heat-shrinkable fabric sheath:
- 2:1 diameter reduction
- 8 diameters from 4 to 40mm
- Electrical insulation
- Wear protection
- Highly resistant to chemicals
- Sold by the metre, adjust your quantity to receive a single length.
-
Protect your hoses and harnesses from external damage
5 reviewsPrice range: 7,90€ through 13,29€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Wednesday 17 December
If you order in the next 50 h and 56 min.
-
Electrical terminalsShrink sleeve with solder 100pcs
Heat-shrink sleeves with tin:
- Reduction ratio: 2:1
- Low temperature tin
- Material: Polyolefin
- Shrink temperature: from 100°C
- Maximum operating temperature: +175°C
- Minimum operating temperature: -75°C
-
Resistant to hydrocarbons and chemicals
15,90€Add to basketDelivery expected on Wednesday 17 December
If you order in the next 50 h and 56 min.
-
ConnectorsWaterproof Boots for AMP Superseal / Tyco / Bosch EV1 / JPT / Deutsch Connectors – 2 to 6 Way – Resistant Rubber
Waterproof boots for electrical connectors – 2 to 6 way
- 🔌 Compatible with AMP Superseal, Tyco, Bosch EV1, JPT, Deutsch DT
- 💧 Perfectly sealed – high IP protection
- 🧰 Ideal for car, motorbike, industry & competition harnesses
- 🔧 Hydrocarbon-resistant rubber
- 🛠️ 4 sizes available (2 / 3 / 4-5 / 6 way)
- 🚗 Protects your connectors from water, mud and dust
-
🧩 Sold individually
Price range: 2,49€ through 3,99€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Wednesday 17 December
If you order in the next 50 h and 56 min.
-
ConnectorsAMP superseal tyco electrical connectors 1 to 6 way 12 volt sold in packs of 5
AMP superseal connectors :
- Choice of sizes, 1 to 6 channels
- Completely waterproof
- IP67 insulation
- Pins and seals supplied
- Voltage: 0 to 24V
- 7 amps/connection
-
Sold in sets of 5 complete male and female sets, with crimp pins and seals.
3 reviewsPrice range: 5,59€ through 14,90€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Wednesday 17 December
If you order in the next 50 h and 56 min.
-
ConnectorsAMP Superseal tyco 350 connector case
Amp superseal connectors:
- Completely waterproof
- Maximum current: 10 amps
- Maximum voltage: 48 volts
- Temperature range: -40°C to 110°C
- IP67 insulation range (against dust and water)
- Slot for sliding bracket
-
Complete kit with crimp pins and pin locks
1 review39,90€Add to basketDelivery expected on Wednesday 17 December
If you order in the next 50 h and 56 min.
-
ConnectorsDeutsch DT terminal and pin extractor for Deutsch electrical connectors
Deutsch terminal extractor:
- Essential for removing pins from Deutsch DT connectors
- Machined, knurled, anodised aluminium
-
Pull out your Deutsch terminals effortlessly
1 review29,90€Add to basketDelivery expected on Wednesday 17 December
If you order in the next 50 h and 56 min.
-
ConnectorsBosch lsu 4.2 lambda sensor electrical connector
Connector for Bosch lsu 4.2 sensor:
- Sold with pins + seals + protective boots
- Fitted with a pin lock to hold the pins firmly in the connector
- For Bosch probe 0 258 007 057
10,90€Add to basketDelivery expected on Wednesday 17 December
If you order in the next 50 h and 56 min.
