Quarter-turn battery isolating switch for negative terminal 6V, 12V and 24V for motorhomes, trucks, tractors, current 300 amps
Quarter-turn circuit breaker for negative terminal 300 amperes
Secure your vehicles by insulating your battery
Avoid discharges when your vehicle is stationary for long periods
The primary purpose of a circuit breaker is to ensure complete electrical isolation of a vehicle.
There are 3 reasons for this:
- In the event of an accident or incident, it is necessary to isolate a car’s electrical circuit to avoid a possible short-circuit.
- On vehicles with a wiring harness in poor condition, to avoid short circuits and fire outbreaks.
- For long-term parking, to avoid discharging the battery if it is lost.
Technical specifications:
- Maximum current: 300 amps
- Voltage: 0 to 32V
- Quarter-turn knob
- For cars, motorhomes, lorries and tractors
Widely used for camping cars, public works machinery and agricultural machinery.
| Weight | 1 kg |
|---|
You may also like…
-
Switches and switch pads6-pole battery switch 12 volts 100 amps FIA + resistor
6-pole FIA circuit breaker:
- Voltage range: 0 to 27V
- Mechanical contact
- 2 power poles
- 4-pole contact
- Meets FIA standards
-
Maximum voltage: 100 amps
24,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 48 min.
-
Relay box and fuses240 amp 12 volt positive and negative power terminal blocks with terminals and accessories
Power centralisation terminal blocks:
- Centralise and organise your power cables
- Sold in positive and negative sets
- Maximum voltage: 48 Volts
- Maximum current: 240 amps
-
30 amps Max / terminal
1 review39,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 48 min.
-
High-temperature silicone sheath 1000°C diameter 6 to 30mm black length 1 metre – 6mm
8,29€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 48 min.
-
Electrical terminalsRound copper terminal for earth braid diameter M5 to M12
Crimp terminals for earth braid:
- Diameters from M5 to M12
- Maximum voltage 600 volts
- Amperage from 10 to 300 amperes
- Wire cross-section from 1.5 to 70mm2
- To be crimped for your earthing braids
-
Sold by 2 units (1 pair)
2 reviewsPrice range: 1,99€ through 4,49€Select options This product has multiple variants. The options may be chosen on the product pageDelivery expected on Wednesday 10 December
If you order in the next 69 h and 48 min.
Related products
-
Switches and switch padsResistor in porcelain for 12V circuit breaker 10 watts 3.3 ohm
Circuit breaker resistor:
- 3.3 ohm resistor
- 10 watts
- 6 to 24 volts
- Porcelain body
1 review4,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 48 min.
-
Switches and switch pads75-amp 12-volt high-power switch
High-power switch:
- Operating voltage: 2 to 28 volts
- Auto hold in position
- Temperature range: -30°C to +60°C
- Installation hole diameter: 10mm
- Tightness: IP65
- M5 terminals
-
Maximum current: 75 amps
1 review31,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 48 min.
-
Switches and switch padsCNC Gold starter plate 8 round aluminium switches PDM “Switch Panel” look 25 amps 12 volts
Machined aluminium 8-switch board:
- 7 fixed, 1 momentary
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 25 amps / switch
- Dimensions: 140 x 80 mm
- 5-axis machined plate in 6061 aluminium
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
- Supplied with full wiring diagram
-
Free colissimo delivery!
-
Simple, reliable and cost-effective
329,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 48 min.
-
Switches and switch padsPDM Switch Pad 6 round switches 25 amps 12 volts Discount Autosport 3D Printed
PDM-style 6-switch board:
- Switch Pad look
- 6-colour LED backlighting
- Up to 20 amps / switch
- Dimensions: 100 x 80 mm
- Rigid 3D printed board
- Temperature range: -20°C to +115°C
- Total weight: 110 grams
- Supplied with 2 screws with GOLD anodised washers + nuts and washers
-
Simple, reliable and cost-effective
99,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 69 h and 48 min.
