Starter switch and ignition key 12 volts 30 amps
Key-operated starter switch:
- Operating voltage: 2 to 28 volts
- Maximum acceptable current: 30 amps
- Self-locking in position
- Temperature range: -30°C to +90°C
- Installation hole diameter: 24mm
- Supplied with 2 keys
-
Connection with 4 terminals on back
17,90€
1 in stock (can be backordered)1 in stock (can be backordered)
Key switch 4 terminals 30 amps
Neman switch, ignition + key-operated starter
Supplied with 2 keys.
Technical specifications:
- Operating voltage: 2 to 28 volts
- Maximum acceptable current: 30 amps
- Self-holding in position
- Temperature range: -30°C to +90°C
- Installation hole diameter: 24mm
- Connection with 4 terminals on back
| Weight | 0,6 kg |
|---|
Reviews about product
-
francois k.
Published on 20 July 2024 at 20h20 (Order date: 12 July 2024 at 14h15)fine
(Translated review)
Related products
-
Switches and switch padsResistor in porcelain for 12V circuit breaker 10 watts 3.3 ohm
Circuit breaker resistor:
- 3.3 ohm resistor
- 10 watts
- 6 to 24 volts
- Porcelain body
1 review4,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 68 h and 6 min.
-
Switches and switch pads6-pole battery switch 12 volts 100 amps FIA + resistor
6-pole FIA circuit breaker:
- Voltage range: 0 to 27V
- Mechanical contact
- 2 power poles
- 4-pole contact
- Meets FIA standards
-
Maximum voltage: 100 amps
24,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 68 h and 6 min.
-
Switches and switch padsPDM Gold style 8-button switch plate + FIA-certified 180 amp electronic circuit breaker
Machined aluminium 8-switch board + electronic circuit breaker:
- 2 circuit-breaker buttons +6 fixed switches +1 momentary switch
- FIA approved 180 amp circuit breaker
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 25 amps / switch
- Dimensions: 140 x 80 mm
- 5-axis machined plate in 6061 aluminium
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
- Supplied with full wiring diagram
- Simple, reliable and cost-effective
-
Equip your car like a factory WRC car or endurance prototype
369,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 68 h and 6 min.
-
Switches and switch pads8 round switch panel PDM look “Switch Panel” 25 amps 12 volts Discount Autosport 3D Printed
8-switch board, PDM look:
- 7 fixed, 1 momentary
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 20 amps / switch
- Dimensions: 140 x 80 mm
- Rigid 3D printed circuit board
- Temperature range: -40°C to +90°C
- Total weight: 150 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
-
Simple, reliable and cost-effective
124,90€Add to basketDelivery expected on Wednesday 10 December
If you order in the next 68 h and 6 min.
