Resistor in porcelain for 12V circuit breaker 10 watts 3.3 ohm
Resistor for electrical circuit breaker
To avoid feedback when the ignition is switched off
Heater with porcelain body
Technical specifications:
- Porcelain body
- 10W
- 3.3 ohm
You may also like…
-
Electric sleeveBlack shrink plug 8 to 60mm, choice of 8 sizes
Heat-shrink plug :
- For insulating metal end caps
- Shrinkable 2/1
- Sold individually
- 8 sizes available
- 8 to 60mm
-
Resistant to chemicals, petrol, motor oil, acid, E85, etc.
1 review1,59€ – 9,90€Select options This product has multiple variants. The options may be chosen on the product page
Delivery expected on Tuesday 6 May
If you order in the next 20 h and 45 min.
-
Switches and switch pads6-pole battery switch 12 volts 100 amps FIA + resistor
6-pole FIA circuit breaker:
- Voltage range: 0 to 27V
- Mechanical contact
- 2 power poles
- 4-pole contact
- Meets FIA standards
-
Maximum voltage: 100 amps
-
Adhesive tapesTESA black cloth tape for electrical harnesses 19mm x 25M
Tesa black fabric adhesive tape:
- Width 19mm
- Length 25 metres
- High insulating power
- Professional finish
- Automotive and industry
-
Electrical harness insulation and finishing
3 reviews -
Switches and switch padsResistor for circuit breaker / battery 10 watts 3 ohm CNC machined body gold
Circuit breaker resistor:
- 3 ohm resistor
- 10 watts
- 6 to 24 volts
- CNC machined
- Gold anodised
- Drilled for mounting
- Lugs drilled to accept soldering wire
2 reviews
Related products
-
Switches and switch pads4 switch starter plate 25 amps 12 volts Discount Autosport 3D Printed
4-switch starter board :
- 3 fixed, 1 momentary
- Simple and easy to install
- Up to 25 amps / switch
- 48 volts maximum
- Dimensions: 140 x 50 mm
- Rigid 3D printed circuit board
- Temperature range: -40°C to +90°C
- Total weight: 150 grams
- Tightness: IP64
- Supplied with 2 countersunk screws + nuts and washers
-
Simple, reliable and cost-effective
2 reviews -
Switches and switch pads3D Print PDM-style 8-button switch plate + FIA-certified 180-amp electronic circuit breaker
PCB with 8 3D printed switches + electronic circuit breaker:
- 2 circuit breaker buttons +6 fixed switches +1 momentary switch
- FIA approved 180 amp circuit breaker
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 25 amps / switch
- Dimensions: 140 x 80 mm
- 5-axis machined plate in 6061 aluminium
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
- Supplied with full wiring diagram
- Simple, reliable and cost-effective
-
Equip your car like a factory WRC car or endurance prototype
-
Switches and switch padsFIA Cut Off switch electronic 180 amps 12 volts FIA approved waterproof IP67
180 amp electronic circuit breaker:
- Circuit breaker controlled by 2 switches
- Can be fitted in place of a conventional circuit breaker
- Simple, reliable installation (no on-board electronics)
- IP67 sealed switches
- IP67 sealing (Fully sealed)
- Operating voltage: 6 to 48 volts
- Brand: Discount Autosport
- Designed, developed and assembled in-house
- Wiring diagram included
-
Delivered as a complete kit
-
Switches and switch pads75-amp 12-volt high-power switch
High-power switch:
- Operating voltage: 2 to 28 volts
- Auto hold in position
- Temperature range: -30°C to +60°C
- Installation hole diameter: 10mm
- Tightness: IP65
- M5 terminals
-
Maximum current: 75 amps
1 review
